VE SERIES 1 E2 HSV VIDEO AND AUDIO INTERFACE
Integrates into the existing 6.5 Inch screen
- Video Image on 6.5 Inch screen.
- 1 x Composite Video with Left and RIght Input Channels / 1 x Reverse camera input(non V9 stereo only)
- Override Mode – If reverse camera is fitted it automatically switches to the reverse camera input when reverse is selected.
- Video input switchable between factory fitted DVD headrests and factory roof mounted DVD player (if fitted)
- Clean and easy to understand installation instructions.
- USB Charging socket 0.4 AMP
- Will not affect factory Satellite Navigation.
- ALL OUR PRODUCTS ARE TESTED 100% BEFORE DISPATCH
- 1 X Input Video/Audio Aux Interface Box
- 1 X Input Video/Audio Aux Interface Box Harness
- Detailed Fitting Instructions
This kit allows for a VIDEO/AUDIO input into the VE series 1 for such things as DVD players/MEDIA Players/etc.
At the flick of a switch you can toggle between both VIDEO/AUDIO input and Factory Rear DVD Headrests/Roof mounted DVD (if installed).
Plug and Play installation** (Only one wire needs to be tapped for power and kit comes complete with full wiring instructions)
Reverse camera integration on Non V9 software models. (Requires VE715 – not included in kit) Camera input is triggered by 12V and overrides VIDEO/AUDIO input.
**If vehicle has Factory Rear Headrests or Roof Mount DVD installed an additional 2 wires must be cut and joined.
Designed and built in Australia to a very high standard specifically for the VE Series 1. The install is a no fuss easy approach with guided instructions. Any problems just give us a call and we are eager to help.
1. This kit does not remove Vehicle In Motion function. As soon as car starts moving screen video image will not be displayed on screen.
2. This kit will not enable the reverse camera function. Our VE715 is also required to enable this function on non v9 stereo's. VE715_v9 is required to enable the camera function on V9 stereo's.